Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.     

Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.     

Microwave‐assisted synthesis and characterization of biodegradable block copolyesters based on poly(3‐hydroxyalkanoate)s and poly(D,L‐lactide)

Microwave (MW)‐assisted ring‐opening polymerization (ROP) provides a rapid and straightforward method for engineering a wide array of well‐defined poly(3‐hydroxyalkanoate)‐b‐poly(D,L ‐lactide) (PHA‐b‐PLA) diblock copolymers. On MW irradiation, the bulk ROP of D,L ‐lactide (LA) could be efficiently triggered by a series of monohydroxylated PHA‐based macroinitiators previously produced via acid‐catalyzed methanolysis of corresponding native PHAs, thus affording diblock copolyesters with tunable compositions. The dependence of LA polymerization on temperature, macroinitiator structure, irradiation time, and [LA]₀/[PHA]₀ molar ratio was carefully investigated. It turned out that initiator efficiency values close to 1 associated with conversions ranging from 50 to 85% were obtained only after 5 min at 115 °C. A kinetic investigation of the MW‐assisted ROP of LA gave evidence of its “living”/controlled character under the experimental conditions selected. Structural analyses and thermal properties of biodegradable diblock copolyesters were also performed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Structures of oxaliplatin‐oligonucleotide adducts from DNA

Oxaliplatin, [(1R,2R)‐cyclohexane‐1,2‐diamine](ethanedioato‐O,O')platinum(II) shows a great efficiency against colorectal cancer. Although the mode of action of oxaliplatin is not yet understood, it is commonly accepted that binding of oxaliplatin to DNA prevents DNA synthesis and alters protein to DNA binding. In order to elucidate the modified DNA–protein interaction and thus to understand the mechanisms leading to cellular misinterpretation of DNA information and apoptosis, we have identified the preferential binding sites and the dynamics of the oxaliplatin‐DNA intrastrand and interstrand adducts at the oligomer level using high‐performance liquid chromatography/electrospray ionization‐tandem mass spectrometry (HPLC/ESI‐MS/MS) and HPLC/inductively coupled plasma‐MS for quantitative studies. We used a combination of benzonase, alkaline phosphatase and Nuclease S1 for digestion. This digestion procedure allows the study of platinated oligomeric nucleotides and more complex interstrand adducts. The digestion products were mostly chromatographically separated and characterized using HPLC/ESI‐ion trap MS/MS experiments. We could show that the adducts to guanine and adenine are quite dynamic; that is, the ratios are changing for several days. In addition, the resulting adducts provide evidence for the action of the digesting enzymes and indicate that the adduct spectrum at the oligomeric level is different to that at the commonly studies dinucleotide level. Copyright © 2012 John Wiley & Sons, Ltd.     

变频控制直接膨胀式太阳能热泵的数值模拟

文中通过对变频控制直接膨胀式太阳能热泵的数值模拟,指出PV/T- SAHP系统实现变频控制从而解决太阳能热泵集热器面积与压缩机的容量不匹配的关键问题是找到系统集热/蒸发器的MSS线.为变工况下太阳能热泵系统的研究提供参考.     

Dielectrophoresis with 3D microelectrodes fabricated by surface tension assisted lithography

This paper demonstrates the utilization of 3D semispherical shaped microelectrodes for dielectrophoretic manipulation of yeast cells. The semispherical microelectrodes are capable of producing strong electric field gradients, and in turn dielectrophoretic forces across a large area of channel cross‐section. The semispherical shape of microelectrodes avoids the formation of undesired sharp electric fields along the structure and also minimizes the disturbance of the streamlines of nearby passing fluid. The advantage of semispherical microelectrodes over the planar microelectrodes is demonstrated in a series of numerical simulations and proof‐of‐concept experiments aimed toward immobilization of viable yeast cells.     

Silica iodide catalyzed,ultrasound-promoted,one-pot four-component synthesis of novel 1,4,5,6-tetrahydropyridine-3-carboxylate derivatives

Silica iodide catalyzed, competent synthesis of 15 novel substituted-1,4,5,6-tetrahydropyridine-3-carboxylate derivatives was achieved by a one-pot four-component cyclocondensation of Meldrum's acid, aryl aldehydes, aromatic amines and ethyl acetoacetate under ultrasonic irradiation. In comparison to the conventional methods, our protocol is convenient, eco-friendly and offers several benefits such as: mild conditions, high yields, shorter reaction time and ease in product isolation.     

Variations of the elastic constants of InSb near the covalent-metallic transition

Abstract

The pulse-echo-overlap method was used to measure the longitudinal and transverse wave velocities in single-crystal (100) and (111) samples of InSb up to 3 GPa at room temperature. The peculiar variations of the elastic constants were observed near the covalent-metallic transition.     

Cycloaddition profile of pentafulvenes with 3-oxidopyrylium betaine: experimental and theoretical investigations

A detailed investigation on the effect of solvent polarity, temperature, and microwave irradiation on periselectivity in cycloaddition reactions of pentafulvenes with 3-oxidopyrylium betaine is described. The base catalyzed generation of 3-oxidopyrylium betaine in CHCl₃ resulted in the exclusive formation of [6+3] adducts. With increase in solvent polarity and temperature, mixtures of [6+3] and [3+2] adducts were formed, where as under microwave irradiation, [3+2] adducts were formed exclusively. The experimental results have been rationalized on the basis of theoretical calculations.     

A facile approach to prepare water-soluble magnetic metal (oxide) frameworks based on Na,Ca alginate and maghemite

1. Download : Download high-res image (135KB)
2. Download : Download full-size image